Women Peeing Themselves On Webcam

Aerator Equipment cube reproduction

Given the failed attempts to play and as I learned from my mistakes, I tried to make changes to my cube in order to minimize "accidents" that could affect the outcome of the next replay.

I removed the internal filter and left only the external filter in order to completely eliminate the problem of "killer jets" that I have sucked the first time the small screens and that if they raise issues of water flow into the filter setesso.


I made a screen that collects all the suction tubes and which distributes the flow while the filter without risk to the children ...

I insulated the tank on three sides with a special adhesive insulation product (among other things has been very efficient) in order to get a screen for any disturbances to the fish as well as for saving energy ...



I decided to remove the heater also seen that some died larvette just because you place on it, in its place I put a Hydor external heater which to date has proved much more efficient than with a constant internal temperature even when the temperature has dropped ...





I have implemented a system of automatic drip by placing a collection tank where I post osmosis water + salts on a cabinet next to the bathtub faucet with a cannula connected allows me to control its flow. I then added the overflow of my craft project (see other topic) to drain the water.
That way I can guarantee a good water quality during the reproductive period without disturbing the fish and without creating hazardous changes in values.



I adopted as a lighting system with dimmable LED strip to, this allows me to create soft light situations very popular with discus and allowing light to leave a minimum 24-24h



Finally I modified the flow in the tank to reduce the turbulence generated by building a small-scale Spray Bar with a PVC pipe with holes.



The couple has already been transferred in the cube, now look forward to a successful hatching of the next ...

Can I Use Eyeclops With My Laptop

taps

"I can not know which Berlusconi was the respect that they had in mind and Dell'Utri tightening this covenant. My experience of these events, but it is my inference is that they (Berlusconi and Dell'Utri ed) that they made the first time the massacres of Cosa Nostra, he then wanted to accredit the outside world as those who had been in able to stop them. And when I see them go down in politics, participating in elections and winning, I understand that they are directly those on which we (Cosa Nostra-ed) have staked everything "

[ From revelations the repentant Gaspare Spatuzza ]

Male Genital Tattoo Pix

overflows CRAFTS - CONSTRUCTION ...

Here in detail how I created the overflow

Materials:

- 16 mm PVC pipe (about 1 meter)
- pvc
curves 5 - 1 T
PVC - PVC glue
- tap for power drain (for maintenance)

Some photos:

Swollen Lymph Node After Dentist

overflows

Having reinstalled my cube breeding Discus, I decided implement a system of automatic exchange water drop by drop.
To this end, I made an overflow Water craft with simple tubes that uses the principle of communicating vessels. This method can also be used for tank with sump, the tank will prevent drilling still get an overflow system that, even in the event of a blackout is always triggered ...

This is the project: